Welcome to the MB Quart Australia & New Zealand website
X
6.5″ 2-Way Coaxial Nautic Speakers
6.5
6.5
6.5
6.5
6.5
6.5
6.5″ 2-Way Coaxial Nautic Speakers
SKU: MBQ-NK2-116W Category: Powersports and Marine Speakers

$199.00

6.5″ 2-Way Coaxial Nautic Speaker System with Integrated Tweeter

Colour

White

Warranty

2 Years

IPX Rating

IPX67

Speaker Impedance (ohms)

35Hz-21kHz (+/- 10dB)

Speaker Sensitivity

87.7dB

Speaker Crossover Slope

87.7dB

Speaker Tower Length (in)

Speaker Hang Height (in)

Speaker Height Inches

1.13

Speaker Mounting Diameter / Cut Out (in)

5.59

Speaker Outside Diameter (in)

6.8

Speaker Mounting Depth / Chassis Depth (in)

3.7

Speaker Size (in)

6.5

Marine Grade Protection / IPX Rating

LIFE SHIELD: Protected for water and dirt. UV protected against sun fade. Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand. IPX67: Tested to the highest Marine and Motorsports standards for resisting the elements.

Tweeters

.75 Inch Pure Titanium Dome Tweeter: Very smooth musical response, high output with minimal required amplifier power.

Cone Material

6.5 Inch Composite Poly Midrange: Water resistant composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame.

Voice Coil / Former Assembly

High Temperature Voice Coil and Former: Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight.

Spider

Water resistant spider: oven fiber composite spider to stabilize the cone and voice coil in all musical situations.

Cooling System

Front and Rear Venting: Air passes through the spider and back plate to exchange air over the voice coil.

External Component Crossover

Marine Certified Crossover: Conformal Coated, Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection. Smooth transition from high to lower frequencies remain musicial and not harsh or distorted.

Frame

Composite ABS and glass fiber frame: Composites add strenth to the frame without adding distortions or harmonics that can affect the tonal quality of the speaker.

Motor

High Energy Y30 Motor assembly: High energy strontium ferrite magnet for higher output with minimal amplifier power.

Grills

Composite: UV treated against sun fade and waterproof.

Supporting Document

Download